Welcome: Dongguan Jiezheng Mold Products Co.,LTD.
Language: Chinese ∷  English

News center

Selection and design of mold base in plastic mold

Today is December 7th, 18th, and soon will be ushered in 2019. This year, the plastic mold industry can be described as ups and downs, just as our life is also spent in the ups and downs. No matter how we work as mold people, we will continue to develop. Well, the trade war has just been cancelled recently, and it is believed that it will bring a good development trend to the plastic mold industry. Today, I introduce the selection and design of mold bases in plastic molds.


1. The standard mold base is preferred, and it is executed according to QJ/MM03.01 "Standard Plastic Formwork".


2. If the non-standard mold base is selected, the standard thickness should be preferred. Refer to QJ/MM03.01 Standard Plastic Formwork.


3. Large non-standard mold base, the diameter of the guide post is not less than Φ60mm, and the guide sleeve is made of cast copper.


4. The wall thickness of the guide sleeve hole of the large non-standard mold base shall not be less than 10mm, the wall thickness of the return needle hole shall be 35~40mm, and the diameter of the return needle shall not be less than Φ30.


5. Large non-standard mold base A plate, B plate lifting screw holes are M36 ~ M48.


6.450T injection molding machine above the mold, the template should have a ring hole on all four sides, there must be a mold angle between each template


7. If it is possible to generate a large side pressure (cavity depth exceeds 50mm), the non-standard large formwork should be designed with the original body.


8. Use as many pillars as possible to ensure that the mold does not deform during operation. The pillars are screwed to the movable seat plate.


9. The length of the mold guide post should be more than 20mm longer than the highest dynamic model core.


10. The mold foot must be installed on the mold. If the part protrudes from the mold, the height of the mold foot must be higher than the part protruding outside the mold.




Note: The above information from the Jiezheng mold  finishing  on the Internet, welcome reproduced, indicate the source!

CATEGORIES

CONTACT US

Contact: Mr. Zhang

Phone: 13509005172

Tel: 0769-85394568

Email: jiezhen_tech@163.com

Add: Dongguan Changan Licheng Industrial F building

Website:www.dipe-n-go.com

    www.128jz.cn

Scan the qr codeClose
the qr code